Can't seem to pair my flare 2's

[Yeager1]

Followed procedures in manual nut Bluetooth light on primary doesn’t go steady, just blinks like the other one and apps only play on one of the flare 2’s

[Unnamed]

Hopefully this will help.

[Shivam_Shah]

We have a member on community who put a video and tips for doing this. You can those out as well:

Connection Problems

Hi @Svana, I have a couple things that you can try… iPhone go into settings on your iPhone under Bluetooth, turn slider to off on the Bluetooth [36907FFB-9FD8-4191-857C-506E0EFE8A03] power off the flare power on the flare press and hold the Bluetooth button so it turns blue [0B1D9553-724B-4806-B2C6-21438A569458] ** note mine is showing white as I was doing partycast turn the Bluetooth on on your phone and it will start to search it will take a few minutes possibly, and make sure you kee…

[RESOLVED] Soundcore mini 3 not connecting party cast

Hi @Ekynoxe, The partycast is a bit fiddle farty… I’ve tried with my flare 2 and meet with success maybe 80% of the time (I only tried 4 times so far…). So here is what I’ve tried… Song in the clip is LØLØ - hate you and is from my speaker test playlist. And the clip is a brief excerpt from an upcoming video I am putting together. Hope it helps, please give a try and if it doesn’t work, I can put to words.

[TheSnarkyOne]

Thanks @Shivam_Shah

One thing I may not have captured, that I have since discovered is only to have one flare on your devices list for Bluetooth, anymore any they compete to pair and won’t pair with each other.

I think the video I posted in the referenced article from Shivams post should be it.

If not let me know and I can check through the steps again.

[winfred]

@Yeager1 You can hold the Bluetooth and Volume+ buttons of the speaker for 2s-8s, after resetting, the speaker will turn off, and then turn on by itself. After you pair one of the Flare2 speakers with your device as the main speaker then you try the secondary Flare 2 to pair with the main speaker. When it has paired to the main speaker, the white indicator light will flash on the main Flare 2 and the white light on the secondary Flare 2 will stay on continuously.