Motion x600 custom EQ thread!

#27

Is the custom eq only active when a device with the app is connected or is it saved to the x600? I connect my smart TV but there isn’t a soundcore app for Google TV😭

1 Like
#28

@Nathan378, I don’t have the 600, but on all my other Soundcore equipment, the EQ is saved to the device (EX, The EQ would be saved on my L3P so it was on there no matter what I was using to drive them with - PC, etc).

1 Like
#29

This sounds terrific on my new X600! Listening to Pearl Jam “Yield” at 50% volume with both Spacial and Bass turned on via Apple Music lossless Atmos mix. Thanks for sharing.

1 Like
#30

Can You guys share the qr codes? These links of EQ settings You post - I just cannot figure out how to use them…

1 Like
#31

[Ricky] share thermal EQ from Motion X600 with you. https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=MfdAzND1&pn=A3130&rg=GW To use, copy the link and open the speaker homepage on the soundcore app.

#32

I like this one for my rock tunes. Thanks.

#33

Lovely eq my man. I copied because I’m a big reggae fan.

#35

Here is my EQ. I looked up RTINGS frequency graph and even it out. This is not a V curve EQ. [GayCanada] share Jonathan X EQ from Motion X600 with you. https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=7DYMQKem&pn=A3130&rg=GW To use, copy the link and open the speaker homepage on the soundcore app.

#36

[DaveyD] share Custom 2 EQ from Motion X600 with you. https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=JKiHMcNv&pn=A3130&rg=GW To use, copy the link and open the speaker homepage on the soundcore app. Check my eq setting out. I’m no expert but I feel it sounds pretty good :blush:

#37

Here’s my edit of the motion x600 after compared it to epicboom. Found out how thin the x600 actually sound :rofl: so I’ve tuned it closer to epicboom (warmer and more acceptable) https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=i2C7iSVc&pn=A3130&rg=GW

1 Like
#38

Top! Like :clap:t2::clap:t2:

#39

Wow, perfect EQ, thank you charlie53544!

#40

Here’s my go to eq for most music genres. Warmer sound with good bass. My firmware is 3.2.1. I have found that the sound can change depending on what firmware you are running.

[Ss_0088] share scubas eq EQ from Motion X600 with you. https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=YA124VvA&pn=A3130&rg=GW To use, copy the link and open the speaker homepage on the soundcore app.

#41

Man this is the best EQ for hip hop and R&B anyway you could tune it to have a little more bass extension? Without losing anything else?

#42

This is a slightly adjusted eq to increase a little bass and keep the higher pitches the same, hopefully this does it for you. Lmk what song you are listening to so maybe i can see if there is a eq that i like that might suit you.:+1:

https://dl-soundcore.soundcore.com/qcdl?flow=soundcore&tk=UqYRGSTd&pn=A3130&rg=GW

1 Like
#43

This updated one is great for vocals but I’m looking for just a little more bass extension while keeping the vocals without increasing it. A song I like to listen to for adjusting the EQ is
a boogie wit the hoodie ft young thug- just like me
The bass comes in nice to adjust was hoping this could help find the perfect EQ Thank you very much!

#44

Can anyone still add to this EQ list? Especially for streaming movies :cinema::wink:

#45

Can anyone help me about firmware vers,on 4.3.6 or 4.3.else? i was using 3.3.6 and it was pretty good with @willswildstrings and @charlie53544’s equaliser settings, but clarity and vocals quality has gone with the 4.3. update. i couldn’t set the equaliser for the older version’s natural sound settings.
Can anyone help me about an equaliser setting just like those?
i mean charlie’s and will’s eq settings for 4.3.6 version
or a way to downgrade my firmware to 3. version (without ldac)

#46

oh i ve found a good eq at last, changing a little bit with charlie’s

#47

Anyone found a good eq setting for 4.3.6? I just bought mine and read theres a lot to tinker about on this thing