Soundcore Motion + dual pair link latency issue

#1

Soundcore Motion + dual pair link latency issue

I used 3.5mm form TV and pair 2 Soundcore Motion +
the latency delay is around 1s

is there a fix for this?
or any 1 have a solution?

#2

exactly the same problem. 1 speaker is ok. 2 speakers there is latency regardless of whether the source is blurtooth or the 3.5mm cable :frowning:

#3

How long have been using this speaker (motion +) in single speaker does audio got delay( latency problem)in Bluetooth or 3.5mm jack.

#4

I have a 3.5mm cord that terminates into two 3.5mm ends (left and right). They are for wired headphones. I would think if I plugged them each into my Motion+"s I wouldn’t get any latency.

Unter normal TWS the main speaker has to send the information to the other 1. I would think that’s what’s causing the latency.

#5

Do not have. What site are they lagging on? I would contact support to see if there is any fix for it. If you do not report they can not know it is an issue. It may be seen by some admins but I would contact support to make sure they get the information… :slight_smile: